Case study

Measured by hand, printed right

Inertia packaging: 50+ softboxes, 10+ aerosols and 15+ labels, calibrated to physical dimensions measured by hand.

RolePackaging designer and print coordinator
ClientInertia
Scope50+ softboxes, 10+ aerosols, 15+ labels
Key ideaNever trust a spec sheet over a tape measure

The problem

A packaging file can look perfect and still print wrong. The usual culprit is the dimension: a dieline built from a spec sheet or from a supplier drawing that is a few millimeters off the real product.

At Inertia's volume, a small dimensional error repeated across a range becomes an expensive one.

The constraints

  • Three different product types (softboxes, aerosol cans and labels) each have different measuring problems.
  • A large number of designs means errors multiply if they are not caught early.
  • Aerosol labels wrap a curved surface, so a flat measurement is not enough.

What I did

Measure the real productI physically measure each product, including the curved aerosol surfaces, rather than relying on spec sheets.
Build dielines from the measurementsTechnical print files are calibrated to the real sizes, with the tolerances a printer needs.
Prove it in 3DEach pack type is mocked in 3D to check fit, proportions and finish before print.
Brief the printer directlySpecifications go to the vendor with the 3D reference, and print quality is checked on site.

What came out of it

More than 50 softboxes, more than 10 aerosols and more than 15 labels were produced from measured dimensions. The saving is mostly invisible: reprints that never had to happen.

The takeaway. Measure first. A tape measure is the cheapest quality control in print.

Related

Questions about this project

What packaging has Ali designed for Inertia?

More than 50 softbox designs, more than 10 aerosols and more than 15 labels.

Why does Ali measure products by hand?

Dielines built from guessed or supplied dimensions cause expensive printing mistakes. Measuring the real product keeps the print files accurate.

Booking new projects

Got a launch coming up? Let's talk before the deadline does.

Based in Karachi (UTC+5), open to relocation and remote work. Tell me what you're making and I'll tell you what I'd measure first.